Luke Steel, a reputable and trustworthy manufacturer and supplier of Carbon Steel EN-353 Bars in Houston, Houstan, provides high-performance steel products to a variety of industrial sectors. High-carbon, high-alloy steel EN-353 is renowned for its exceptional strength, wear resistance, and case hardenability. Every EN-353 bar produced by Luke Steel satisfies international quality standards, guaranteeing exceptional mechanical performance and longevity. Luke Steel is a reliable partner for EN-353 steel bar requirements throughout the USA because of its ability to deliver customised solutions for precision components, supported by cutting-edge technology, skilled professionals, and a robust logistics network.
About 0.17–0.23% carbon, 0.50–0.80% manganese, 0.35–0.75% nickel, 0.80–1.10% chromium, and 0.15–0.25% molybdenum make up Carbon Steel EN-353 Bars. With a tough, ductile core and a hard, wear-resistant surface, this alloyed steel provides exceptional case hardenability. After case hardening, the typical tensile strength is between 850 and 1000 MPa, with good fatigue resistance and impact strength. Parts subjected to high stress and wear in demanding environments can benefit from EN-353’s combination of hardness, toughness, and dimensional stability, which makes it perfect for carburising and hardening treatments.
Size : 22mm upto 800mm
Thickness : 1-2 inch
Length : 3 meter, 6 meter
Form : Carbon Steel Round, Hex, Flat, Half Round, Oval, Rectangular in Black & Bright Finish
| Grade | C | Mn | Si | S | P | Cr | Ni |
| EN353 | 0.35 – 0.45 | 0.60 – 1.00 | 0.10 – 0.35 | 0.50 max | 0.50 max | – | – |
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min |
| Carbon Steel EN353 | 80(551) | 35 (241) | 30 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
Cold Drawn and Polish | 3.00 – 75.00 | 1/8″ – 3.00″ | h8-h9-h10-h11 |
Cold Drawn and Ground | 10.00 – 75.00 | 5/6″ – 2.50″ | h8-h9-h10-h11 |
Peeled and Polished | 40.00 – 150.00 | 1.50″ – 6.00″ | h11, h11-DIN 1013 |
Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00″ | h9-h10-h11 |
Cut to size on request (tolerance +2/-0 mm). Standard lengths of EN45 Bars 2000 mm up to 6000 mm available
5.0 | 45.0 |
6.0 | 50.0 |
7.0 | 55.0 |
8.0 | 60.0 |
9.0 | 65.0 |
10.0 | 70.0 |
12.0 | 75.0 |
16.0 | 80.0 |
20.0 | 90.0 |
25.0 | 100.0 |
30.0 | 130.0 |
35.0 | 160.0 |
40.0 | 200.0 |
In the engineering and automotive sectors, carbon steel EN-353 bars are frequently used for parts that need a tough core and a hard, wear-resistant surface. Gears, pinions, shafts, spindles, clutch parts, and heavy-duty bearings are among the common uses. EN-353 is the preferred material in the automotive industry for engine and gearbox components that require high fatigue strength and surface hardness. It is also utilised in industrial machinery and equipment where strength, durability, and accuracy are crucial. EN-353 is the preferred material for parts that need to endure constant mechanical stress and impact because of its superior case hardening qualities.
Luke Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Houstan, USA.
Copyright 2025 Luke Steel. All rights reserved
