When it comes to 450 BHN (Brinell Hardness Number) Sheets and Plates, we’re talking about some seriously tough, wear-resistant steel products built for extreme durability in harsh environments. These plates are made from a mix of elements like carbon, manganese, chromium, nickel, and molybdenum, all of which give them impressive mechanical properties. With a hardness rating of 450 BHN, they boast a tensile strength of around 1250 MPa and a yield strength close to 1000 MPa. Renowned for their toughness, weldability, and structural integrity, these plates are reliable even in the most challenging conditions, making them perfect for industrial applications that demand long-lasting resistance to wear and impact.
You’ll find 450 BHN Sheets and Plates widely used in industries where wear and abrasion are everyday challenges. Think mining equipment, dump truck liners, crushers, hoppers, chutes, and construction machinery. Their high impact resistance and strength make them perfect for dealing with abrasive materials like coal, rock, and sand. Plus, they’re also utilized in cement plants, power generation facilities, and heavy-duty material handling systems. The ability to weld and form these plates makes them a great choice for custom fabrication in industries that need structural reliability and performance that lasts, even under the toughest operating conditions.
| Heat Treatment | Rolling/Normalised, N, Q+T |
|---|---|
| Width | 1000mm-4500mm |
| Thickness | 5mm-150mm |
| Length | 3000mm-18000mm |
| Production | Hot-Rolled (HR) |
| Surface Paint | PVDF, PE, HDP, SMP, EP |
| C *) | Si *) | Mn *) | P | S | Cr *) | Ni *) | Mo *) | B *) |
| Max % | Max % | Max % | Max % | Max % | Max % | Max % | Max % | Max % |
| 0.26 | 0.7 | 1.6 | 0.025 | 0.01 | 1040 | 1050 | 0.6 | 0.005 |
| Thickness | Hardness HBW | Typical yield strength MPa, |
| mm | min – max 1) | not guaranteed |
| 3 – 80 | 425 – 475 | 1100 – 1300 |
| (80) – 100 | 410 – 475 | 1050 – 1300 |
| (100) – 130 | 390 – 475 | 1000 – 1300 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| 1/8″ | 3/8″ | 3/4″ | 1-1/2″ | 3″ |
| 3/16″ | 1/2″ | 1″ | 2″ | 4″ |
| 1/4″ | 5/8″ | 1-1/4″ | 2-1/2″ | Â |
| *1/8″ thick plate is available in one size only 60″x 120″. The 3/6″ thick plate is available only as 48″ x 144″ and 96″ x 144″. | ||||
| Thickness | Width | Length |
| 4 | 2000 | 6000 |
| 5 | 2000 | 6000 |
| 6 | 2000 | 6000 |
| 6 | 2500 | 6000 |
| 8 | 2000 | 6000 |
| 8 | 2500 | 6000 |
| 10 | 2000 | 6000 |
| 12 | 2000 | 6000 |
| 15 | 2000 | 6000 |
| 16 | 2000 | 6000 |
| 20 | 2000 | 6000 |
| 25 | 2000 | 6000 |
| 32 | 2000 | 6000 |
| 40 | 2000 | 6000 |
| 50 | 2000 | 6000 |
| 60 | 1800 | 3400 |
Luke Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Houstan, USA.
Copyright 2025 Luke Steel. All rights reserved
