High-performance steel solutions for vital industrial applications are offered by Luke Steel, a reputable manufacturer and supplier of Carbon Steel EN-351 Bars in Houston, USA. The case-hardening steel EN-351 is renowned for its exceptional blend of a hard, wear-resistant surface and a tough core. Luke Steel guarantees that each EN-351 bar is manufactured to the highest industry standards, providing exceptional strength, surface hardness, and machinability. Luke Steel is a dependable supplier of EN-351 carbon steel bars across the country, catering to industries like heavy engineering, manufacturing, and automotive. We are dedicated to quality, prompt delivery, and customer satisfaction.
The typical composition of Carbon Steel EN-351 Bars is 0.15–0.20% carbon, 0.60–0.90% manganese, 0.70–1.10% chromium, 0.10–0.20% molybdenum, and 1.10–1.40% nickel. This alloy has a tough inner core and a wear-resistant surface due to its exceptional case hardenability. When case-hardened, EN-351 has a tensile strength between 600 and 800 MPa and a surface hardness of up to 60 HRC. It has good impact resistance, fatigue strength, and toughness. Because of these mechanical characteristics, EN-351 can be used in parts that are exposed to high internal stresses as well as surface wear, particularly following heat treatment and carburising procedures.
| Grade | EN351 |
|---|---|
| Specification | BS970 1.0904 55Si7 55S6 55Si2Mn ASTM 9255 |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Section | 3.0 to 12.0mm thickness |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size | 1/2″ to 495mm Diameter |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Finish | Cold (bright) drawn, centreless ground,smooth turned, peeled, slit rolled edge, hot rolled, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Condition | Hardened & tempered, annealed |
| Technique | EN45 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Processing | Bar cutting to 650mm |
| Form | EN45 Welding Rod, Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Element | En42J |
| C | 0.75 – 0.90% |
| Mn | 0.50 – 0.90% |
| Si | 0/1 – 0.35 |
| S | 0.04% Max |
| P | 0.04% Max |
|
ULTIMATE TENSILE STRENGTH, S. (MPA) |
621 |
|---|---|
|
Modulus of elasticity, E (Gpa) |
204 |
|
Fatigue strength coefficient, of (Mpa) |
948 |
|
Fatigue strength exponent, b |
-0.092 |
|
Fatigue ductility coeffient ,ef |
0.26 |
|
Fatigue ductility exponent,c |
-0.445 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
Cold Drawn and Polish | 3.00 – 75.00 | 1/8″ – 3.00″ | h8-h9-h10-h11 |
Cold Drawn and Ground | 10.00 – 75.00 | 5/6″ – 2.50″ | h8-h9-h10-h11 |
Peeled and Polished | 40.00 – 150.00 | 1.50″ – 6.00″ | h11, h11-DIN 1013 |
Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00″ | h9-h10-h11 |
Cut to size on request (tolerance +2/-0 mm). Standard lengths of EN45 Bars 2000 mm up to 6000 mm available
5.0 | 45.0 |
6.0 | 50.0 |
7.0 | 55.0 |
8.0 | 60.0 |
9.0 | 65.0 |
10.0 | 70.0 |
12.0 | 75.0 |
16.0 | 80.0 |
20.0 | 90.0 |
25.0 | 100.0 |
30.0 | 130.0 |
35.0 | 160.0 |
40.0 | 200.0 |
Applications needing a strong, ductile core and a long-lasting, hard surface frequently use carbon steel EN-351 bars. Gears, cams, crankshafts, pinions, shafts, and other high-wear parts in the automotive and industrial machinery industries are typical applications. The steel is perfect for parts that need to withstand extended surface friction while maintaining internal toughness because of its exceptional case hardenability, fatigue resistance, and impact resistance. Additionally, machine tools, gearboxes, and agricultural equipment use EN-351. It is a popular option for precision components that are subjected to dynamic and repetitive stresses in demanding environments because of its mechanical qualities and versatility.
Luke Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Houstan, USA.
Copyright 2025 Luke Steel. All rights reserved
